Geometry

numberquantitybuttonalgebrabuttonfunctionsbutton

pagebreak

 modelingbuttongeometrybuttonstatsprobbutton

pagebreak

The buttons above will direct you to the six conceptual categories of the CCSS-M. Clicking the above links will allow you to view the standards and associated 5-E Lesson Plans. These complete lessons come packaged with models, documentation, and resources. Please feel free to submit your own lesson plans by contacting our webmaster. Growing this database will empower teachers to bring high quality learning opportunities to thousands of students.

pagebreak

Geometry CCSS-M Domains, Clusters, and Standardspagebreak

congruence

G.CO – Congruence

pgbrk2

pagebreak

Extend the properties of exponents to rational exponents.

1. Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions of point, line, distance along a line, and distance around a circular arc.

Symmetry + Reflection MS PS 4 2 + G CO 1, 3, 4, 6

2. Represent transformations in the plane using, e.g., transparencies and geometry software; describe transformations as functions that take points in the plane as inputs and give other points as outputs. Compare transformations that preserve distance and angle to those that do not (e.g., translation versus horizontal stretch).

 

 

3. Given a rectangle, parallelogram, trapezoid, or regular polygon, describe the rotations and reflections that carry it onto itself.

Symmetry + Reflection MS PS 4 2 + G CO 1, 3, 4, 6

4. Develop definitions of rotations, reflections, and translations in terms of angles, circles, perpendicular lines, parallel lines, and line segments.

Reflections – HS PS4 1 + G CO

Symmetry + Reflection MS PS 4 2 + G CO 1, 3, 4, 6

 

5. Given a geometric figure and a rotation, reflection, or translation, draw the transformed figure using, e.g., graph paper, tracing paper, or geometry software. Specify a sequence of transformations that will carry a given figure onto another.

 

pagebreak

Understand congruence in terms of rigid motions.

6. Use geometric descriptions of rigid motions to transform figures and to predict the effect of a given rigid motion on a given figure; given two figures, use the definition of congruence in terms of rigid motions to decide if they are congruent.

Symmetry + Reflection MS PS 4 2 + G CO 1, 3, 4, 6

7. Use the definition of congruence in terms of rigid motions to show that two triangles are congruent if and only if corresponding pairs of sides and corresponding pairs of angles are congruent.

 

 

8. Explain how the criteria for triangle congruence (ASA, SAS, and SSS) follow from the definition of congruence in terms of rigid motions.

 

pagebreak

Prove geometric theorems.

9. Prove theorems about lines and angles. Theorems include: vertical angles are congruent; when a transversal crosses parallel lines, alternate interior angles are congruent and corresponding angles are congruent; points on a perpendicular bisector of a line segment are exactly those equidistant from the segment’s endpoints.

 

 

10. Prove theorems about triangles. Theorems include: measures of interior angles of a triangle sum to 180°; base angles of isosceles triangles are congruent; the segment joining midpoints of two sides of a triangle is parallel to the third side and half the length; the medians of a triangle meet at a point.

 

 

11. Prove theorems about parallelograms. Theorems include: opposite sides are congruent, opposite angles are congruent, the diagonals of a parallelogram bisect each other, and conversely, rectangles are parallelograms with congruent diagonals.

 

pagebreak

Make geometric constructions.

12. Make formal geometric constructions with a variety of tools and methods (compass and straightedge, string, reflective devices, paper folding, dynamic geometric software, etc.). Copying a segment; copying an angle; bisecting a segment; bisecting an angle; constructing perpendicular lines, including the perpendicular bisector of a line segment; and constructing a line parallel to a given line through a point not on the line.

 

Mirror Images HS PS 4 1, 3 + A SSE 1 + G

 

13. Construct an equilateral triangle, a square, and a regular hexagon inscribed in a circle.

 

 

 

pagebreak

 

 

 

similiary

G.SRT – Similarity, Right Triangles, and Trigonometry

pgbrk2

pagebreak

Understand similarity in terms of similarity transformations.

1. Verify experimentally the properties of dilations given by a center and a scale factor:

Mirror Images HS PS 4 1, 3 + A SSE 1 + G

 

a. A dilation takes a line not passing through the center of the dilation to a parallel line, and leaves a line passing through the center unchanged.

b. The dilation of a line segment is longer or shorter in the ratio given by the scale factor.

2. Given two figures, use the definition of similarity in terms of similarity transformations to decide if they are similar; explain using similarity transformations the meaning of similarity for triangles as the equality of all corresponding pairs of angles and the proportionality of all corresponding pairs of sides.

 

 

3. Use the properties of similarity transformations to establish the AA criterion for two triangles to be similar.

 

pagebreak

Prove theorems involving similarity.

4. Prove theorems about triangles. Theorems include: a line parallel to one side of a triangle divides the other two proportionally, and conversely; the Pythagorean Theorem proved using triangle similarity.

 

 

5. Use congruence and similarity criteria for triangles to solve problems and to prove relationships in geometric figures.

 

pagebreak

Define Trigonometric Ratios and solve problems involving right triangles.

6. Understand that by similarity, side ratios in right triangles are properties of the angles in the triangle, leading to definitions of trigonometric ratios for acute angles.

 

 

7. Explain and use the relationship between the sine and cosine of complementary angles.

 

 

8. Use trigonometric ratios and the Pythagorean Theorem to solve right triangles in applied problems. ★

Trig and Projectiles HS PS 2 1 + G SRT 8

Solar Panel Angles HS ESS 3 4 + G SRT 8 + G MG 3

8.1 Derive and use the trigonometric ratios for special right triangles (30°, 60°, 90°and 45°, 45°, 90°) CA

 

 

pagebreak

Apply trigonometry to general triangles.

9. (+) Derive the formula A = 1/2 ab sin(C) for the area of a triangle by drawing an auxiliary line from a vertex perpendicular to the opposite side.

 

 

10. (+) Prove the Laws of Sines and Cosines and use them to solve problems.

 

 

11. (+) Understand and apply the Law of Sines and the Law of Cosines to find unknown measurements in right and non-right triangles (e.g., surveying problems, resultant forces).

 

 

 

pagebreak

 

 

 

circles1

G.C – Circles

pgbrk2

pagebreak

Understand and apply theorems about circles.

1. Prove that all circles are similar.

2. Identify and describe relationships among inscribed angles, radii, and chords. Include the relationship between central, inscribed, and circumscribed angles; inscribed angles on a diameter are right angles; the radius of a circle is perpendicular to the tangent where the radius intersects the circle.

3. Construct the inscribed and circumscribed circles of a triangle, and prove properties of angles for a quadrilateral inscribed in a circle.

4. (+) Construct a tangent line from a point outside a given circle to the circle.

 

 

pagebreak

Find arc lengths and areas of sectors of circles.

5. Derive using similarity the fact that the length of the arc intercepted by an angle is proportional to the radius, and define the radian measure of the angle as the constant of proportionality; derive the formula for the area of a sector. Convert between degrees and radians. CA

 

 

 

 

pagebreak

 

 

 

circles

G.GPE – Expressing Geometric Properties with Equations

pgbrk2

pagebreak

Translate between the geometric description and the equation for a conic section.

1. Derive the equation of a circle of given center and radius using the Pythagorean Theorem; complete the square to find the center and radius of a circle given by an equation.

2. Derive the equation of a parabola given a focus and directrix.

3. (+) Derive the equations of ellipses and hyperbolas given the foci, using the fact that the sum or difference of distances from the foci is constant.

3.1 Given a quadratic equation of the form ax2 + by2 + cx + dy + e = 0, use the method for completing the square to put the equation into standard form; identify whether the graph of the equation is a circle, ellipse, parabola, or hyperbola and graph the equation. CA

 

 

pagebreak

Use coordinates to prove simple geometric theorems algebraically.

4. Use coordinates to prove simple geometric theorems algebraically. For example, prove or disprove that a figure defined by four given points in the  coordinate plane is a rectangle; prove or disprove that the point (1, 3) lies on the circle centered at the origin and containing the point (0, 2).

5. Prove the slope criteria for parallel and perpendicular lines and use them to solve geometric problems (e.g., find the equation of a line parallel or perpendicular to a given line that passes through a given point).

6. Find the point on a directed line segment between two given points that partitions the segment in a given ratio.

7. Use coordinates to compute perimeters of polygons and areas of triangles and rectangles, e.g., using the distance formula.★

 

 

 

pagebreak

 

 

 

volume

G.GMD – Geometric Measurement and Dimension

pgbrk2

pagebreak

Explain volume formulas and use them to solve problems.

1. Give an informal argument for the formulas for the circumference of a circle, area of a circle, volume of a cylinder, pyramid, and cone. Use dissection arguments, Cavalieri’s principle, and information limit arguments.

2. (+) Give an informal argument using Cavalieri’s principle for the formulas for the volume of a sphere and other solid figures.

3. Use volume formulas for cylinders, pyramids, cones, and spheres to solve problems.★

Science and Math of Bubbles HS PS 2 4 + G GMD 3

 

pagebreak

 

Visualize relationships between two-dimensional and three-dimensional objects.

4. Identify the shapes of two-dimensional cross-sections of three-dimensional objects, and identify three-dimensional objects generated by rotations of two-dimensional objects.

5. Know that the effect of a scale factor k greater than zero on length, area, and volume is to multiply each by k, k², and k³, respectively; determine length, area and volume measures using scale factors. CA★

Surface Area to Volume Ratios in Cells HS LS1 2 + G GMD 5 + G MG 1

6. Verify experimentally that in a triangle, angles opposite longer sides are larger, sides opposite larger angles are longer, and the sum of any two side lengths is greater than the remaining side length; apply these relationships to solve real-world and mathematical problems. CA

 

 

 

pagebreak

 

 

 

geomodel

G.MG – Modeling with Geometry

pgbrk2

pagebreak

Apply geometric concepts in modeling situations.

Orbiting Bodies Eccentricity HS-ESS1-4, G-MG1

1. Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder).★

Surface Area to Volume Ratios in Cells HS LS1 2 + G GMD 5 + G MG 1

3D Vision HS LS 1 2 + G MG 1

Planetary Motion HS-ESS1-4, N-Q-2, F-LE-1,6, G-MG-1, F-IF-4

2. Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, BTUs per cubic foot).★

3. Apply geometric methods to solve design problems (e.g., designing an object or structure to satisfy physical constraints or minimize cost; working with typographic grid systems based on ratios). ★

Solar Panel Angles HS ESS 3 4 + G SRT 8 + G MG 3

 

pagebreak

CCM Logo Animated